Pot Light Installation in Toronto & the GTA
Pot lights (recessed lights) give a room clean, even lighting without fixtures hanging from the ceiling. We plan the layout, cut in the fixtures, run the wiring and connect dimmers so the finished room looks and feels right — not just bright.
What’s included in our pot light installation service
- Room-by-room layout planning (spacing, placement relative to walls, cabinets and beams)
- New pot light installation in finished ceilings and open walls
- LED retrofit and replacement of older halogen or incandescent pot lights
- Dimmer and smart-switch installation and compatible driver matching
- Colour temperature guidance (warm vs. neutral vs. cool white)
- Insulation-contact (IC) rated fixtures where the ceiling requires them
- Wiring, switching and patch-ready openings for drywall repair
When to call for pot light installation
- Renovating a kitchen, basement, or living area and want a modern lighting layout
- Replacing a single dated ceiling fixture with recessed lighting
- Old pot lights that flicker, run hot, buzz on the dimmer, or use expensive halogen bulbs
- Finishing a basement where ceiling height is limited
How our pot light installation process works
- 1
Walkthrough
We look at the room, ceiling access and what you want to light — tasks, art, or general ambience.
- 2
Layout & quote
You get a clear layout and a written quote before any work starts.
- 3
Install
We install fixtures and wiring, protecting your floors and furniture as we work.
- 4
Test & walkthrough
We test every light and dimmer with you and explain how everything is controlled.
Pot Light Installation: what to know before you start
How many pot lights do I need?
There is no single number. Spacing depends on ceiling height, fixture output, and how the room is used. A common starting point is roughly one light per 4–6 square feet of floor area for general lighting, adjusted for the room. We plan it on site.
Warm or cool light?
Most homeowners prefer 2700K–3000K (warm white) for living spaces and 3000K–4000K for kitchens and workspaces. Many LED pot lights now allow selectable colour temperature.
Insulated ceilings
Where a ceiling has insulation above it, fixtures must be rated for insulation contact and installed appropriately. We select the correct product for your ceiling type.
Pot Light Installation FAQs
Can pot lights be installed in a finished ceiling?
Usually yes. In many cases we can fish wiring through the ceiling and cut small openings for each fixture, which limits drywall repair. Access above the ceiling (attic, floor above) determines how much work is involved, and we confirm this at the walkthrough.
Do I need dimmers?
Dimmers are optional but strongly recommended. We match dimmers to the LED fixtures so they dim smoothly without flicker or buzzing.
Request a free pot light installation quote
Pot Light Installation across Toronto & the GTA
Related electrical & lighting services
Light Fixture Installation
Ceiling, wall, vanity, pendant and island lighting installed safely and level.
Learn more →
Under-Cabinet Lighting
LED task lighting for kitchen counters, hardwired or plug-in, with dimming and switching.
Learn more →Electrical Panel Upgrades
Panel replacements and service upgrades for renovations, additions, and modern electrical loads.
Learn more →Ready to brighten your home?
Tell us about your project and get a clear, written quote.